Carbonaceous Backfill


Carbonaceous material made of the highest quality carbon materials to provide the cathodic protection industry with advanced, engineered materials that provide a combination of properties including high conductivity, resistance to corrosive environments, environmental stability, and easy-pouring and cavity-filling characteristics.

Petroleum Coke (PC)

Petroleum coke is a manufactured carbon product produced at a limited number of oil refineries. Petroleum coke results from the thermal processing of residual oil, which has been cracked or otherwise processed to remove low boiling fractions.

Coke is made by heat-treating the residual oil (more accurately described as tar) to a temperature high enough to result in its polymerization to form a non-melting solid carbon. The process is performed to maximize the yield of lower molecular weight compounds derived from crude oil feedstocks. Coke, as it is removed from the coking process, is referred to as green coke. Green petroleum coke contains approximately 15-20% residual hydrocarbon materials. These hydrocarbons are those compounds that do not polymerize in the coking process and cannot be removed from the coke substrate due to process limitations.

Calcined petroleum coke (CPC) is manufactured by heating green coke to approximately 1300-1400 C in a rotary kiln. This affects the removal of virtually all residual hydrocarbons and moisture. The final calcined product contains only a trace of volatile matter, and 0.3-6% sulfur, depending on the petroleum base used to make the coke. Calcined and green petroleum cokes are inherently low in ash constituents. The fixed carbon content of most calcined petroleum coke products ranges from approximately 97-99.5%.

Petroleum coke is used in applications where high quality non-graphitic carbons are required. Some applications for petroleum coke include foundry products, wear moderators for PTFE compounds, rubber compounds, reducing reagents, ceramic packing media, oxygen exclusion from molten materials, manufactured carbon shapes, alloys, cathodic backfill, drilling additives, case hardening, seals, mechanical carbons, and flooring.

Metallurgical Coke (MC)

Metallurgical coke, also known as Met coke, is a carbon material manufactured by the destructive distillation of various blends of bituminous coal. Bituminous coal is a soft, medium-grade coal that contains a high percentage of volatile components. Destructive distillation is performed in coke batteries, which are banks of large enclosed kilns.

Once the kilns are loaded, they are heated to approximately 1000 C in the absence of air. During the heat cycle the volatile components of the coal are released and the solid coal goes through a partial melt and subsequent re-solidification to a non-melting carbon. Volatile components include coal tar, ammonia, and literally dozens of other products of decomposition. Most volatile components are reclaimed or recycled. The final solid is a non-melting carbon called Met coke.

As a result of the loss of volatile gasses and of partial melting, Met coke has an open, porous morphology and may appear glassy in some specimens. As a result of the heat treatment process, Met coke has a very low volatile content. However, the ash constituents that were part of the original bituminous coal feedstock remain encapsulated in the resultant coke.

Met coke feed stocks are available in a wide range of sizes from fine powder to basketball-sized lumps. Typical purities range from 88-92% fixed carbon. Commercial grades are available in sizes from 30-micrometer powders up to 20 cm lumps.

Metallurgical coke is used where a high quality, tough, resilient, wearing carbon is required. Applications include but are not limited to conductive flooring, friction materials, foundry coatings, foundry carbon raiser, corrosion materials, drilling applications, reducing agents, heat treatment, ceramic packing media, electrolytic processes, and oxygen exclusion


Chemical Composition (%) PC MC
Ash 0.2 % max 8-10%
Volatiles 0.3 % max 0.5 %
Moisture 0.3 % max 6-9%
Fixed Carbon 99.0% min 86.5 min (dry basis)
Sulphur 0.2% max 0.8 %
Size Grading 0.25 – 1mm 0 -10mm
Resistivity 0.1 Ohm cm 50 Ohm cm

Επικοινωνήστε μαζί μας

    Name (required)

    Email (required)

    Subject that you are interested in



    Log in with your credentials

    Forgot your details?